Lantronix XPort Pro is a self-contained embedded networking module that effortlessly handles demanding applications, with power of an advanced bit. Full Networking in a Tiny Package. XPort removes the complexity – of designing network connectivity into a product by incorporating all of the required hardware. The XPort / XPort Pro Evaluation Kit is designed with all the necessary items to help you successfully implement the XPort / XPort Pro / XPort Pro Lx6 into your.
|Published (Last):||2 December 2010|
|PDF File Size:||9.27 Mb|
|ePub File Size:||17.25 Mb|
|Price:||Free* [*Free Regsitration Required]|
National Control Devices will be closed for the holidays from December 22nd through January 2nd. Orders placed during this time will begin processing when we reopen on January 2nd, Please keep in mind our standard lead times when placing orders Dismiss. Please upgrade your version lanteonix IE to at least 9, or use a modern browser such as Chrome or Firefox.
This section will give you step by step instructions on how to access your latnronix using DHCP Addressing. If you would like to use a static IP Address that will be covered further on in the guide. This section assumes that you have a network with a windows based machine on it running NCD Base Station.
Both are covered individually in the following pages. This communication protocol makes use of Network Sockets to create point to point tunnels that data can flow through bi-directionally. In this way the computer that is controlling the relay can send commands and shortly thereafter receive the response through lantroonix same Socket. In most programming languages all you have to do to open a socket is import the appropriate plug-in, build the socket object, and connect the socket using the IP Address and Port Number of the lantrohix device.
Once the request for connection reaches the target device via the IP Address as a physical address of an office building and the port number as the number of the particular lahtronix you are trying to reach.
Lantronix XPort Communications Module Quick Start Guide –
Base Station software will adapt this window for your particular model of controller. You can find the MAC Address of the module in one of two ways.
The first option is to look on the top of the Ethernet Module itself where it is printed. This method will not work if there are multiple network devices on the same network. For communications reliability, especially via Remote Access, we recommend using a Static IP Address when you feel comfortable doing so. This will ensure that the device will always be where you expect it to be when you lantronic to connect to it. While this technology makes network devices very easy to use and locate it is not as reliable in that certain circumstances will cause the IP Address it assigns to change or have two devices on the same IP Address.
This should not be used in most relay control applications. DHCP is what these modules ship out as. In this way we can ensure that the module will successfully connect to any network regardless of IP Range. This technology is the antithesis of DHCP in that it is manually set and does not dynamically change without some kind direct action.
The downside of this method is that, if lwntronix incorrectly, can make the module unreachable through any standard means. This is the preferred and more reliable way to handle network IP Address allocation.
For improved reliability the IP Lantronox assigned to this Module should be reserved on your router. By remote access, we mean the ability to access this module and control its relays from anywhere in the world. The only thing required to do this, outside of internet access, is Port Forwarding lajtronix your router. We have made remote access simple by giving you a gateway to get the External IP Address and port number of the device.
In your favorite browser simply enter link. You can either use this information using Base Station or you can use it with your own custom application it is suggested that you query this every time you connect to the board for a custom application because most External IP Addresses rotate as a security precaution.
Any attempt at remote access while still on the same network as the device you are trying to control will cause a communication error and will not be lantroonix. Instead llantronix LAN Communications. If you have multiple network devices on the same network then you will be required to change the TCP Listening Socket of them in order to have differentiated Remote Ports.
Without doing this all of your network devices will report the same Remote Port to link. Your router, on the other hand, can only forward Port to one device at any given time. If different ports are assigned to each device using Base Station then link.
Port Forwarding is a protocol used by your router to allow incoming requests for connections to get through it to a specific device on a specific port. Here is an example of how it works. In this example your router has been setup to forward incoming requests for port to the device at the IP Address This means that any time any device tries to access this Port on your External IP Address External IP Address are how everyone outside of your network can locate your network, check ipchicken.
If this Port Forwarding rule was not in place and a request came in one port then the router would not know which device it was supposed to forward this to on its own network. In this case the request for connection would be denied.
There is a two pin jumper connection on the Ethernet Module that is used to set your Ethernet Module back to Factory defaults. This jumper must be disconnected from the board if you wish to use this module. The next time that power is applied to the board it will be in complete factory settings. If your device will be connected to a switch or directly to a computer where DHCP is not available you must store a static IP address to the device using the instructions in this guide.
Once the controller has a Static IP address you can connect it to a network switch and make connection to it via that static IP. If you wish to connect the device directly to a computer you will need a cross over Ethernet cable. A Virtual COM Port is a software layer that allows you to communicate to a network device as if it were a serial device connected directly to your computer.
If you would like more information on this please contact us. If you are running the latest version of Base Station then this error is caused by either the Module being reset to factory defaults using the clear jumper or the module not being on the same network as the computer Base Station is being used on.
To check and make sure it is on the same network as Base Station log in to your router via the computer being used for Base Station and check the list of attached devices for MAC Address of your module. Windows Firewall, McAffee, and many other antivirus software may block incoming UDP broadcasts that are used to locate this device over the network.
Please disable this firewall temporarily to ascertain whether or not this is the problem. If this device is listed here then the device is on the same network and the problem is with module itself. In this case you should set the module back to factory defaults to ensure no incorrect settings are in the module. This should fix this problem. If this process does not fix your problem please contact us. This broadcast is required to give link. If a computer on the same network as the Ethernet Device has internet access then you will need to contact your Network Administrator about possible firewalls or the manufacturer of your router about any firewalls that may be active on your laantronix.
UDP Broadcasts over port will need to be allowed to pass the through the firewall for link. If the controller does not respond through your custom application you should try connecting to it using Base Station Note: Base Station only communicates over port If you cannot communicate to it using base station you should reset the module back to factory defaults and reconfigure it using NCD Base Station. If the module has been successfully reconfigured and base station can connect to it, but there is still no response contact us for support as there may be oantronix defect in the board itself or in the application.
For future fulfillment possible reasons it could go bad that we can explain how to fix:.
If the controller seems to work correctly for a while and then seem to randomly drop communications the problem is most likely with using inductive loads. These loads include motors, transformers, and just about anything that cause movement. It is possible for these surges to reach the microprocessor, thus causing the failure of communications as it shuts down to protect itself.
The use of capacitors is suggested to reduce the effects of this. These operate by absorbing the spikes in power and slowly releasing the stored up energy safely back into the system.
For more information on the use of induction suppression see our full article on Induction Suppression. If the static IP Address was incorrectly set to something that lanyronix network still has access to, simply change the set static IP Address of the module.
By default the web lantroni will ask you for a password even if there is none set. IF none has been set, simply hit enter or select OK. If this does not get you into the web interface then you will need to do a factory reset and reconfiguration of the module. Internet Protocol Address — The standard way in which computers are addressed over network communication. An IP Address can be through of as a digital street address. Despite the work internet it is used even in networks xpor are offline.
This IP Address is used to locate devices on the same network or sub-networks. If used to attempt access from external network the attempt will fail. This IP Address is used to locate devices on external networks.
Port Numbers are basically inlets into a network or device that allow access to its internals from remote communications. They can be thought of as doorways into a specific device which can be opened or closed depending on the needs of the application. A protocol that routers use to forward incoming internet requests to the correct device on the correct port.
Lantronix XPort Communications Module Quick Start Guide
MAC addresses are used to differentiate devices from each other. A Network Socket is a virtual tunnel that allows data transmission between two devices. Numerous protocols can be used over a Network Socket. This is a communication protocol that uses Network Sockets to transfer data between devices Bi-directionally.
These are generally called Stream Sockets as data can flow between them lantronnix.
It can be thought of as a phone call between two devices. The WiNet Gateway is lantroniix stand-alone web server that allows you to control wireless relays using the web pages inside the WiNet Gateway.
The WiNet allows you to control up to 16 wireless relay boards each capable of controlling relays simply from a tab in your browser or smartphone.
You must be logged in to post a comment.
To learn something new, take the path that you took yesterday. You are using an unsupported browser! Introduction This section will give you step by step instructions on how to access your controller using DHCP Addressing. Communication Setup TCP Socket Setup Remove the Ethernet Relay Controller from its packaging and connect it to the same network as the computer that you are going to use to control it note: